Specifications:
The Big F Pro series UV kits are all Italian Made Plug and Play UV units.
The included Italian pre-filters reduce sediment to prevent it from sheltering bugs from the UV light. The Italian UV chamber eliminates harmful pathogens, including bacteria, protozoa (parasites) and some viruses and features an IP54 rated controller.
The units come pre-plumbed, with a single inlet/outlet, mounted on a single bracket under a lockable cover which can protect the unit from weather.
If you are on a rural supply (e.g. rain water, bore water etc) that has no protection, installing a UV is an insurance policy. Unfortunately we cannot see harmful bugs like bacteria, parasites or viruses and only find out they have been present if we become unwell. It is not practical to test our water every day, so installing a Big F Pro UV gives you the peace of mind that you are protecting the health of yourself, your family and visitors.
Of course if you have had your water tested and found harmful bacteria present, then you should boil your water until you have a Big F Pro UV installed to protect you from any future contamination.
| Big F Pro 156 | |
|---|---|
| Flow Rate/Dose | 54lpm@40mJ/cm2 |
| Filter Cartridge 1 | TS 20 Micron Pleated 10” Big |
| Filter Cartridge 2 | CPP 1 Micron Polyspun 10” Big |
| Power Consumption | 61Watts |
| Power Cable Length | 2m |
| Inlet/Outlet | 1” BSPF Inlet / 1” BSPM Outlet |
| UV Reactor Material | 304 Stainless Steel |
| UV Reactor/Controller Protection Class | IP54 |
| Shipping Weight | 20kg |
| Measurements (Height x Width x Depth) | 790mm x 722mm x 205mm |
| Incoming Water Quality Parameter | |
|---|---|
| UV Transmittance | >95% |
| Total Hardness | <120mg/L |
| Iron | <0.3mg/L |
| Manganese | <0.05mg/L |
| Hydrogen Sulphide | <0.3mg/L |
| Operating Conditions | |
|---|---|
| Power Supply | AC 110-240V, 50/60Hz |
| Max Working Pressure | 8.3bar |
| Working Temperature | 4-45°C (Protect from Freezing) |
| UV Dose | 30-40mJ/cm2 |
| Service Intervals | |
|---|---|
| Filter Cartridges | 3-12 Monthly or when pressure loss reaches 1bar (15PSI) |
| UV Lamp | Annually (9,000 hours) |
| UV Quartz Sleeve | Cleaning is advised at least quarterly. This may vary depending on your water quality – seek the advice of your supplier for your situation |
| Quartz Sleeve O-Ring | Annually (unless damaged earlier) |
Customer Reviews
"Dear 4 Pumps,
I purchased a pump off you mid Feb. Just wanted you to know best value for dollar ever. The little pump is working very hard in a factory pumping liquid with about 20% solids and hasn't missed a beat. Great pumps, thanks."
Stephen - Tasmania
"I have already recommended to you to two other locals up here with wells similar to mine about your pump and how well it was working."
Jim - Girraween
"I picked it up and its going exceptionally well, very good pump."
Evan - Ilbilbie
Loading... Please wait...
