Atlas Filtri DP DUO 20" BIG
Specifications:
Other Details
Application:
Whole Supply
Size:
390 x 185 x 640 (mm)
Description
Product Description
Supplied with filters:
1 x 20µm Pleated Polyester 20″ Jumbo Cartridge 20″ x 4.5″ [807308]
1 x 1µm Polyspun 20″ Jumbo Cartridge 20″ x 4.5″ [807300]
- A Duo 20” BIG Filter housing, with 1.5” in/out plastic BSP threads, pressure gauge (manometer) ports and drain port.
- Chooses the Duo with 2 filter bowls on a single moulded head to save time plumbing up separate housings when you need to use two in series and reduce the number of potential leak points,
- Designed to accept 20”x 4.5” filter cartridges.
- These are most commonly used domestic, commercial and industrial applications
A: 640mm
B: 390mm
C: 185mm
Features
These have time and labor saving additions built in:
- Pressure gauge ports – no more need to plumb pressure gauges separately
- Adding pressure gauges makes it easier than ever to see when filters need changed, giving you optimal life and performance of your filters
- Drain Ports – Making changing filters easier than ever
- Just open the drain port and drain the water into a bucket, no more messy water splashing on the floor, and the filter bowl is lighter and easier to manage
- Drain ports are easy to open with the your included reversible spanner, one side for the filter bowl, the other for the drain port
These are available in:
- Mono – single filter housing
- Duo – Double Filter housing with moulded head
- Trio – Triple – Filter housing with moulded head
All Atlas Filtri BIG Housings come with:
- Bracket
- Spanner
- Lubrikit (O-ring lubricant)
Working Conditions |
Max Working Pressure |
8.3bar (120 psi) |
Max Working Temperature |
45°C (113°F) |
Min Working Temperature |
4°C (39.2°F) |
Filters Included
Technical Specifications
Brand |
Atlas Filtri |
Product Type |
Pleated Filters |
Flow Rate (L/min) |
82 |
Material |
Polypropylene/Polyester Fabric |
Nominal Micron Rating |
20 |
Min Temp (degrees celsius) |
4 |
Max Temp (degrees celsius) |
45 |
Filter |
20″ Big |
Brand |
Atlas Filtri |
Product Type |
Polyspun Filters |
Flow Rate (L/min) |
67 |
Material |
Polypropylene |
Nominal Micron Rating |
1 |
Min Temp (degrees celsius) |
4 |
Max Temp (degrees celsius) |
80 |
Filter |
20″ Big |
SEDIMENT FILTERS
- Sediment Filters are used to remove particles from water and protect downstream taps etc from clogging
- Sediment cartridges are resistant to attack by bacteria and chemicals and are suitable for a wide range of applications, including domestic, commercial and industrial.
CS & TS Pleated Cartridge Range
- Polyspun cartridges are commonly used as the final filtration for sediment as damage does not compromise the micron rating
- These depth filters have a very large surface area and better dirt holding capacity than pleated filters
- 5 & 1 Micron versions are also often used as the final filter before a UV as drinking water standards require a minimum of 5 micron depth filtration
- 25 Micron version is sometimes used in place of a pleated filter for those who prefer to just change filters without the need to clean them, the higher dirt holding capacity means more time between giving the filters attention
Customer Reviews
"Dear 4 Pumps,
I purchased a pump off you mid Feb. Just wanted you to know best value for dollar ever. The little pump is working very hard in a factory pumping liquid with about 20% solids and hasn't missed a beat. Great pumps, thanks."
Stephen - Tasmania
"I have already recommended to you to two other locals up here with wells similar to mine about your pump and how well it was working."
Jim - Girraween
"I picked it up and its going exceptionally well, very good pump."
Evan - Ilbilbie