ASC 75 Litre Stormwater Pit with D18VAMAG Pump

ASC 75 Litre Stormwater Pit with D18VAMAG Pump

The ASC 75 litre Stormwater pit and pump system is a ready to go pit for areas affected by stormwater. With a grated lid, the system is designed to be able to collect both surface water or from underground pipes and then pump away the excess water. 

Common uses for the system include garage and driveways flooding, exterior edges of patios, around swimming pools, cellars and basements or in the backyard where you may have clay underground.

The system includes an ASC D18VAMAG. A proven pump with a vertical float for small confined spaces, it can pump out at flows of 135LT/min and as high as 6.7m in vertical lift. See our pump performance chart below to make sure you get the necessary flow at your lift level. 

The stormwater pit includes all internal pre-plumbing, which means it’s a plug and play system for you. We include a 40mm ball isolation valve as well as a 40mm flap valve. The outlet on the system is a 40mm threaded BSP brass fitting, ready to tap into your pipework.  The vertical float pump system comes with a 10m Australian power plug. 

The ASC D18VAMAG is a vertical float sump pump designed for use in confined spaces, where a normal float may get stuck. It can be used in grey water pumping, sump emptying, septic effluent pumping, water transfer and the pumping of light industrial and factory waste systems. The open nature of the semi vortex impeller allows for suspended solids of up to 15mm and means the pump is less susceptible to blockages. 

The ASC D18VAMAG is characterised by a cast iron body and impeller for durability and the heavy handed nature of builders, plumbers and civil earth workers who throw these pumps in and out of utes and into pits for pumping of dirty water. The ASC D18VAMAG sump pump has a carry handle, 10m H07RNF power cable, an automatic float switch and pumps to heads of 6.7m. With a flow rate of up to 135LT/min, trust ASC to deliver the drainage pump solution for your project. 

RELN Series 450 Heavy Duty Commercial Pits are the perfect surface water pits for commercial applications including driveways, carparks, and trafficable areas. The Galvanised Steel Class A Grate is perfect for light commercial applications and areas with pedestrian traffic.

• Durability – Made in Australia from tough, durable, and lightweight UV stabilised recycled plastic
• Lock down security – Lock down security grate kits are available to secure the grate in place
• Commercial surface drainage solution – With a range of sizes and grate options, RELN Series 450 Heavy Duty Commercial Pits are ideal for driveways, carparks and any trafficable areas.
• Grates are available in AS3996 Class A or B Load Ratings – Perfect for commercial applications
• Environmentally friendly – Made from 100% UV stabilised recycled plastic

Pump Characteristics:

• Cast iron pump body and impeller for durability
• Fully automatic operation with vertical float arm.
• Dual mechanical seal – carbon/ceramic
• Handy carry handle
• Universal hose tail adaptor
• 240V single phase motor with in-built auto reset thermal overload.
• 10m H07RNF power cable.
• Dewatering of cellars, etc.
• Pumping clean or slightly dirty water
• Flows to 135 L/min
• Heads to 6.7m
• Pump starts at 300mm and stops at 120mm

• Suitable for grey water pumping, sump emptying, septic effluent pumping, water transfer and pumping of light industrial waste