Grundfos UniLift AP12.40.08 Pump

Grundfos UNILIFT AP12.40.08 Pump

Submersible drainage pump type

• Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase totally enclosed motor in insulation class F with thermal overload protection. The pump is fitted with a suction strainer.
• The impeller is a Semi-open impeller for 7/16 in free passage suitable for pumping groundwater, surface water, rain water and similar liquids.
• The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.
• The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings
• The pump is ready for use as it is fitted with carrying handle and is supplied with a 9.843 ft mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.

2 Year Standard Warranty

Liquid
Pumped liquid: any viscous fluid
Liquid temperature range: 32 .. 131 °F
Density: 62.29 lb/ft³

Technical
Type of impeller: Semi-open
Maximum particle size: 7/16 in
Approvals on nameplate: CSA

Materials
Pump housing: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Impeller: Stainless steel
DIN W.-Nr. 1.4301
AISI 304

Installation
Pump outlet: Rp 1 1/2
Maximum installation depth: 9.843 ft

Electrical data
Type of motor: PSC
Power input – P1: 1.58 W
1.2 kW
Main frequency: 60 Hz
Rated voltage: 1 x 220-230 V
Rated current: 5.8 A
Starting current: 24 A
Cos phi – power factor: 0,99
Rated speed: 3400 rpm
Capacitor size – run: 16 µF/400 V
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Length of cable: 9.843 ft
Type of cable plug: NONE

Others
Net weight: 12.60kg
Gross weight: 13.19kg